She Runs!

The one BIG thing we did not know about the boat was how, or even if, the engine ran. The boys at Rawhide had it running when they did their checks on it, but that was last summer. They did not completely drain the water and winterize it correctly, so we were concerned the block may have been cracked, which would cost me a minimum of $1000 and an entire weekend to fix.

My buddy Bob and his son came over tonight and we hooked the engine up to the garden hose and the Ford Explorer up to the battery leads (the boat has no battery). We primed the carb with a little gas and Bobby hit the starter. BAM!!! It sounded like a shotgun went off right next to my head as it backfired. It took me a couple of seconds to shake that off, so we tried again.

This time the results were much better. She started right up and ran great. There was a small leak from somewhere that I could not see, but Bob tightened it up and it stopped. We let it run for a while until my hands were almost frozen, then Tyler took over and held the hose in the intake. We let the engine run about 10 minutes and it purred quite nicely! Whew, what a relief!

Boat Progress

We have all been busy with our little (okay, not so little) boat restoration project. The boat itself is a 1990 Mariah 1850XL, which is an 18 1/2 foot open bowrider with a 4.3 liter 175 horsepower Mercruiser V-6. We bought it a few weeks ago from Rawhide Boys Ranch. Our goal is to have it done and in the water in about 6 weeks, or whenever the lakes thaw, whichever comes first 🙂

As she looked last summer


The seats and all vinyl are shot and will be completely replaced. We started by pulling all the old vinyl off, which revealed mostly rotted plywood that will have to be replaced.


While planning how we would install new seats, my friend Bob suggested that maybe we could update the boat to a much more modern look. The original boat had back-to-back seating, and small jump seats on either side of the “doghouse”. Most modern boats have a nice “sundeck” that covers the engine and provides a nice place to sunbathe and chill. A bench seat will provide 3-4 across, all forward facing, seating. That simple suggestion was all I needed to hear, I wanted it!

So I designed and built a new doghouse frame that would enclose the engine.
It is very strong and also very light. I also made similar, but much smaller, sections to go on either side of the doghouse. They all need to be easily removed to work on the engine, battery, etc.
That picture also shows the new front seats, but don’t look at those yet 🙂

Since all seats will now be forward facing, we needed new helm seats. I found a brand new set on eBay for a fair price, and designed and built “boxes” to support them.
The pressure-treated 2×4 on the bottom uses the existing Mariah mounting bolts and brackets. Missy and I then covered the boxes with vinyl, and I installed Garelick 12-point swivels that will allow the seats to rotate 180 degrees. I had to design my own mounting system (4 oddly sized bolts) to get the seats mounted to the swivel, but it came out very nice.


All of the woodwork for the new seats is complete and we are now doing the upholstery work. I started the sundeck tonight and will finish it tomorrow. Here is what it looks like now.

Happy Birthday Halle!

Today is Halle’s 10th birthday! Wow, double-digits already! Did you ever think you’d spend part of your birthday weekend building boat parts? 🙂

I’m sorry that you had to go to school on your birthday, but I hope you enjoyed having fun this past weekend. I know this past year has been very rough on you, but you are pulling through like a real trooper! Your mom and I love you very much and hope you have a wonderful birthday!

All About Boats

It seems that I have forgotten to update my blog lately, thanks dad for pointing that out! 🙂 Actually we have been very busy, but lately our new family boat has been what is taking up our time. We bought a 1990 Mariah 1850XL from Rawhide Boys Ranch and have been working to get it all fixed up and ready for boat season, which we hope will start in about 6 weeks.

The boat is a 18.5′ bowrider for fishing and skiing, with a 175 HP Mercruiser 4.3 liter V-6. As far as we know right now, the work we have to do is mostly cosmetic. We are replacing all the vinyl, and converting the standard back-to-back seating to the much more contemporary sundeck with bench seating style. It’s a little hard to explain, but I will post some pictures here as we make more progress.

Here is some of the work we did last weekend.

The new “Doghouse” Cover. It supports the sundeck on top and provides the bench seating on the front.

Halle sanding the doghouse.

Halle waterproofing the wood. I supervised.

Get Real America

Ok, so I just watched President Obama give his speech to congress about the economy and stimulus package. That guy can really put together words! In all seriousness, his speech tonight was very uplifting and encouraging, somewhat naive (though he knows that), and 100% exactly dead on. I like his no BS, tell it like it is approach. That is so refreshing!

One of my lifelong mantras is that I always buy American made product whenever I can. Yes, I know they cost more. Yes, I know sometimes they are not as good as other products, but often times they are far better. It is increasingly difficult to honor this pledge, but it is something we should all do.

It’s funny how often I hear politicians talking about Free Trade Agreements, and about how we live in a global economy. Bullshit. What they should be talking about are FAIR Trade Agreements, not Free ones. Is it fair that American companies pay up to 100% tariffs for products sold in China, yet they are allowed to sell their lead-based crap here? Don’t we have enough rubber dog crap and Nerf darts here already?

Is it okay for American companies to shut down factories in Detroit, build new ones just across the border in Mexico (or Canada too), and then come to congress with their hands out? Okay, let’s just pretend we give them $20 billion, what are they going to do with it? Mismanage it? Develop new products that people worldwide want to buy? Get a clue and get with the times? Fire the entire upper-management that got them into this mess to begin with?

Based on recent history I would say a bit of mismanagement and developing new products. The upper-management is not going to fire themselves, they have too much pride for that. Okay, so I’m an eternal optimist. Let’s say they stop laying people off (using our money to pay them of course), and retool to create some awesome new cars based on modern technology. They can do it, Americans can do it. Once these cars are designed, now what? Are they required to build the cars and batteries in this country, or will they be looking to outsource those jobs too? Remember, America and specifically OUR MONEY is what is going to buy them the time to develop these products. Are they going to turn their backs on us when it comes time to build them? They will, and they must be stopped. Stimulus money going to car companies should have more strings attached than a marionette. The jobs MUST stay here, end of discussion.

Likewise, the banks that are receiving billions had better start lending it. Their failure to lend money is one cause of the death spiral we are in. If they are getting stimulus money, they must be required to lend it and stop the cycle. They must be required to loan it to average Americans, not just those with ultra high FICO scores and those that don’t really need it. Hell, a revamp of the whole FICO scoring system should be made into law, but this is for a previous blog entry. Any system that rewards people for bad behavior should be abolished.

So that is how things should work, but what about reality? The reality is that we cannot depend on anyone in government, auto execs, or banks to get us out of this mess. Not even President Obama. His intentions are good and he is inspiring, but even as president, his power to actually make change is limited. It is up to us. So how do we turn this country around?

It’s quite simple really, BUY AMERICAN. Look at the tags on clothes and the labels on boxes. Commit to only buying American made products. Forget WalMart, until they feel it in their bottom line they will not be offering many American Made products. Support your local companies. Don’t always look for the cheapest item on the shelf. The better item will likely cost a little bit more and be made right here. If you cannot find what you are looking for that is made here at your local retailer, find it online, and give UPS or FedEx a few bucks to ship it to your house.

A global economy is bullshit. Like it or not, the entire world follows us. When we are doing good, chances are so are they. Look at the world economy now. We are in the tank, and so is the rest of the world. When we emerge from recession, the rest of the world will too. And if they don’t? So what. Think about fair trade, not free trade. It’s okay in my mind to occasionally buy products from other countries if those countries have established fair trade agreement with us, tit for tat. Hey, I love a nice Porsche as much as the next guy.

We are the only ones that can break the cycle. Government and banking don’t get it, and even if they do, they don’t care. Companies understand money, we must speak with our checkbook. Buy a Ford (one that is made here) instead of a Nissan. You just kept a few hundred Americans employed. They can now go out to eat lunch at a restaurant that is still open, and tip the waitress a buck or two. She can spend that money getting here hair done, and the hairdresser can buy a new copy of Windows (wait for version 7) to install on his computer. The programmers at Microsoft can now do some home improvements, and the construction workers and contractors can now buy a new Chevy truck.

No matter how many people are involved, or how big the circle is, we are all connected in this way. Take any one of the people and/or jobs out of the equation, and the economy is exactly what we have today, a mucking fess.

I Am Not Crazy

A lot of my friends and family tell me they think I am crazy. I like to fly airplanes, ride motorcycles, and have been skydiving and bungy jumping. But today in Madison they did something that I have absolutely zero interest in doing, the Polar Plunge!

They do it to raise money for charity. That’s good, but these girls are totally nuts! The picture pretty much sums it up. The fire department breaks a huge hole through the ice covering Lake Mendota. Ambulances, police divers, and firefighters are present in case something goes really wrong. Nothing ever does, thankfully, but I think they should have some shrinks on hand because something is definitely wrong with these girls!

A Very Sad Anniversary

Today marks a sad anniversary for our family. One year ago this evening, Mike Guillickson (Halle’s dad) was killed in a tragic snowmobile accident in Blue Mounds, WI. He was doing nothing wrong, was not drunk, was wearing a helmet, and in fact was stopped or nearly stopped while waiting on some friends to catch up to him. Another snowmobile jumped over a small hill, and struck Mike in the head and chest, killing him almost instantly.

Mike and I were fairly new friends, having known each other for just over a year before he was killed. I liked him a lot, we had a lot in common, and I have no doubt we would have become good friends over the years. I had known his sister Kelsi for many more years, and have gotten to know his other sister Heidi much better since the accident, as well as most of the Gullickson family. I am fortunate for this, but like everyone else, I also miss Mike and his almost always smiling and friendly face, his frequent and funny telephone calls. Mike and I had a really good conversation, about 15 minutes or so, on the phone just 3 hours before his death.

He had called looking for Halle, who had sort of played hooky from school and was shopping with Missy. Mike had played hooky from work to go snowmobile riding, and was making his daily rounds of cell phone calls to his friends and family. We joked about how you should never waste a sick day when you are actually sick. Hell, if you’re sick go to work! Take sick days when you feel great and want to do something fun. We chatted for a while about high school, and then he said he was going to call Halle on Missy’s cell phone. We said goodbye for the final time.

He did get a hold of Halle and they spoke for a while. One of his favorite sayings was “Never say goodbye without saying I love you”. So I have no doubt those are the final words Halle ever heard him speak. This past year has been one of ups and downs for Halle, and the rest of the family too. Breaking the news to her about her fathers death was the hardest thing Missy and I had ever done in our lives. Halle has had a tough year, but she has also shown signs of amazing resilience. She remembers her father in nothing but a glowing light, exactly as she should. He was a very good dad to her for several years, following a rocky beginning. He was a good man, a great dad, and a friend to MANY. It would have been very hard to not like “Gulli”.

So today my thoughts and best wishes go out to Halle, Heidi, Kelsi, Chick, Julie and the rest of the Gullickson family. Thanks and wishes also go out to Mark Pattinson for being a best friend to Mike (and us) and organizing The First Annual GulliFest, Dave Best at Throttle Masters (Proved that big tough biker dudes can cry and still be bad ass), the class of Dodgeville High School, Jodie Klare at Park Elementary School, The Crusaders, Loners, and CC Riders motorcycle clubs, and The Ridgeway Riders snowmobile club. Collectively everyone has helped in their own small (or big) way to make this year just a little better for Halle and everyone else that loved Mike.

So tonight, before you go to bed, say a little prayer for Halle and for Mike. I hope that he is looking down upon her and is happy with the awesome young lady that is emerging from the little girl he helped raise. I hope he approves of my step-daddying skills, and knows I am trying my best to raise her well and give her the quality of life she deserves.

We miss you Mike…

Very Beautiful!

While surfing the web tonight looking for my next great hobby, I stumbled upon Demons Cycles, a company that specializes in manufacturing and selling motorcycle parts for the custom bike builder.

While pouring through their fantastic web site, I stumbled upon this. The sleek lines and classic curves just yelled out to my inner animal. The wide stance and beautiful, bold colors jumped off the page. The smooth and sexy shape just screamed bad-ass! The fit and finish is incredible, the black trim offset nicely by the softer colors.

Oh yeah, the motorcycle is pretty hot too!

25+ Random Things About Me (From Facebook)

1) I was born in Evansville, Indiana. I consider it a good place to be FROM. I joke that my parents found the hole in the fence when I was young enough to not have been tainted by being born there.

2) I have lived in Indiana, Iowa, Kentucky, Missouri, North Carolina, Washington state, Tennessee, Georgia, Florida and Wisconsin.

3) My accent is a strange mix of Wisconsin and Southern.

4) I have lived in St. Louis, Missouri 4 different times in my life, 78-84, 94, 96, and 2001-02. When people ask me where I am from I usually say St. Louis, though I have actually spent more time in Wisconsin than any other state.

5) Despite the harsh winters and short summers, Wisconsin is by far my favorite place to live. I will live the rest of my life, die, and be buried here. I cannot pinpoint exactly what I love about Wisconsin, it is likely a combination of friendly people, low crime, great schools, 4 seasons, and many other little things that just add up. I feel more at home here than anywhere else.

6) I have owned about 10 different motorcycles in my life, but probably rode them less than 5,000 miles total. My daughter Delaney says I only like motorcycles that are broken. There is a lot of truth to that. I enjoy working on them as much, maybe more, than actually riding them.

7) I have been a licensed pilot since 1988, and earned an instrument rating in 2006. I started flying aerobatics last summer.

8) I have started building 5 different airplanes, but sold them all before completing them.

9) I hate the prefixes “ex-” and “step-“. I prefer to call Janelle my first wife, not ex-wife. Halle is my daughter, not my step-daughter. I firmly believe that once you are family you are always family. I encourage my family to continue their relationship with Janelle, and vice-versa. This has mostly worked out just fine.

10) My parents divorced after 37 years of marriage. They are both much happier now and we are all very happy for them.

11) I drink very little, usually only on New Years Eve. I probably don’t drink a 6 pack the rest of the year combined.

12) When I was young I wanted to be a police officer. This lasted all through high school, I was in the Charlotte Police Explorers for many years. I still often think that I should have done that instead of getting into programming. Usually only during periods of unemployment 🙂

13) My Grandpa Bill was and always will be my hero. My dad is a very close second.

14) My dad and I are very close now, but we had a pretty rough relationship when I was a kid and teenager.

15) After high school I lived with a very rough group of friends. We (myself included) had some pretty nasty drug habits. Most of them are now dead or in prison. In the end, this experience somehow made me a better person.

16) I enjoy home remodeling, even though I often get very frustrated and cuss a lot when working on projects.

17) I only buy cars from GM, Ford or Chrysler. I will never buy a foreign car, even if they are made here. However, I have owned a couple of Porsche’s just because I love them.

18) I prefer pickup trucks to just about everything else, except Mustangs and Corvettes.

19) I do not, and will not, shop at Walmart. I think they are an evil company and refuse to give them any of my business. My wife disagrees.

20) I am a recovering Republican. I voted for Obama this past year, the first time I ever voted for a democrat. I still think Reagan is the best president we ever had.

21) I am a perfectionist in almost everything I do. This often gets me into trouble. I just believe there is a right way and a wrong way to do something and cannot stand mediocrity.

22) I think Windows Vista is a steaming turd, but love the beta of Windows 7. Go figure.

23) I will not buy or use technology that uses DRM (Digital Rights Management). If a CD, game or music download has DRM, I skip it. If I buy something I expect it will always work and don’t like to be bothered or harassed by my music player, DVD player, or computer.

24) I am agnostic, not an atheist. I simply do not know if God exists, and quite frankly, neither do you. But that is why they call it faith, right? So I am lacking faith, but not morals or scruples.

25) I am married to my very best friend in the whole world. I consider myself a very lucky man. I have a nice home, a lovely wife, and 3 great daughters. Everyone is healthy and happy. I consider it my greatest life goal to make sure I take care of them. A great man once said that life is not about what you take out of it, it is about what you leave behind.

BONUS

26) I am not rich, and have never been rich. But I have been poor. Trust me, being middle-class is just fine.

27) My favorite motorcycle is the Harley-Davidson Softail FX-STD, though I have never owned one. My favorite of the ones I have owned is the Suzuki VS1400 Intruder. I wish I had never sold it.

28) My all time favorite car is the Ferrari 308 GTSI. I of course have never owned one, nor driven one.

29) My granddad served under General Patton in World War 2 as a tank driver. He did not talk to anyone much about his experiences during the war until a few years before his death. He told me a lot one night while we were watching the move “Patton”. Pretty horrible stuff. My dad remembers him waking up screaming in the night when he was a child. He told me that night that he had killed many German soldiers, but the only thing that haunted him all those years was having to shoot a young boy that was going to blow up his tank. He never shook that memory.

30) My Grandpa Bill was the finest man that I ever knew. He was the son of an alcoholic father and both of his parents died when he was very young. He was raised by friends of the family. Despite this beginning, he grew up to be a man that did not drink or smoke, worked very hard for very little money, and raised 2 kids and supported my grandma when she went through some tough mental issues. He never faltered or failed and was always smiling and happy, at least on the outside. He taught me how to drive, play poker, cuss, and shoot a gun. He loaned me money for my first car and my pilot training, and would not allow me to pay him back even though I tried. He was the best grandpa a bunch of us kids could ask for and we all miss him dearly.

31) My dad is also a hell of a good man. I did not understand it when I was a kid why he worked so hard and so long. It seemed like he wasn’t around that much, but in reality he was. He had to work very hard to provide the kind of life he wanted for his family, and I had a very good life growing up. I can see this now, though I did not see it then. I understand now what I didn’t back then.

32) I think King Kong is the best movie “monster” ever created, but Godzilla is a very close second.

33) My favorite author is Dan Brown, and favorite book is “Angels and Demons”. I cannot wait for the movie, May 15th at a theater near you!

34) Other than computer programming books, I read very little, and almost never for pure enjoyment.

35) I think True Blood is the best TV show ever made. Californication is also good, and I love “My Name is Earl”.

36) I wish Hollywood would ma

ke more G-rated movies. I also wish Missy and I had more time to see R rated ones.

37) I have never seen Star Wars beginning to end, and have never watched a complete episode of Star Trek, much to the dismay of my computer programming friends.

38) I am a master of C, C++ and C#. I also know PHP, Perl, and x86 assembly language. I can program in Visual Basic too, but usually don’t admit to it. I consider it a beginners language, and have little (professional) respect for people who making a living out of it. At some point you have to take off the training wheels, even if you fall flat on your face a few times.

39) I hate creating web sites/pages. I can do it, and can do it well, but I hate it, truly despise it.

40) I write too much, like 40+ answers to 25 Random Things About Me 🙂